If you reset the Sunlight Group EMS, the network configuration will be reset to DHCP. Take care if you perform a factory reset remotely, because the Sunlight Group EMS might lose network access if it needs a specific network configuration!
Before you perform a factory reset, it is recommended that you make a backup of the settings.
Lost access to commissioning interface You can retrieve the IP address through mDNS. See also Option 3.2 of Accessing the commissioning interface.
You can reset the Sunlight Group EMS through the commissioning interface, from the settings tab. Scroll down to "Factory reset", and click "Factory reset".
Switch the Sunlight Group EMS and wait until it has booted (LED is cyan or blue during startup). This can take several minutes without internet. When the Sunlight Group EMS is on, you can reset the Sunlight Group EMS by pressing the physical reset button in the pin hole next to the RS485 interface for 10 seconds. The status LED will flash red-green. Release the reset button when the status LED becomes blue. The Sunlight Group EMS is now rebooting.
Make sure you feel the reset button clicking when pressing it.
This model does not have physical reset button. You must reset the Sunlight Group Controller through the commissioning interface.
This model does not have physical reset button. You must reset the Sunlight Group Controller through the commissioning interface.