Inverters with firmware version older than the following have a minimum SoC level of 35%.
Starting from this version, this setting can be configured by the user.
Minimum required version: MCU version 1040, DSP version 1042.
Warning
NOTE: RS485 Device Addresses
You MUST give each devicea unique address on the RS485 bus. Check the device manual for instructions.
Use lower addresses first (1, 2, ...) because the Sunlight GroupEMS will find them faster!
For each device, it is generally recommended to keep the factory-default baud rate, parity, and stop bits. The Sunlight GroupEMS will scan those first.
